Forge High Flow Intake Hose - Golf MK8 R/S3 8Y (RHD ONLY)
PLEASE NOTE THIS PRODUCT IS ONLY COMPATIBLE WITH RHD VEHICLES
Introducing the Forge High Flow intake hose for the revised 2021 onwards MQB platform 2.0 DNF code engines. This new product replaces the restrictive plastic inlet pipe, with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.
The Forge developed turbo inlet adaptor improves your vehicles airflow in several ways; designed in a similar way to a conventional velocity stack it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the intake system.
The plastic OEM inlet hose has ribs and steps within the bore causing turbulence and disturbing the airflow, the Forge Motorsport Silicone large turbo inlet hose has increased flow over the standard item and testing on the dyno certainly represent the huge benefits from such a well-engineered product.
The Forge Motorsport inlet pipe fits directly to the factory airbox along with most aftermarket performance intakes. On testing the new Mk8 Golf R we found VWs bhp quotes conservative as our results showed 365bhp in complete stock attire.The hours of development and testing are translated into the results you can see on the dyno graph. This is a component which proven below definitely adds extra power.
A Simple swap on the dyno to our FMTIA5 proved to enhance power and lower throttle response with gains of 12BHP and 15lb/ft torque at peak RPM along with around 8lb/ft and 8BHP in the midrange.
This is a simple installation and a modification that releases even more power from the VAG motor and fitting takes typically around 40 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. This product is available in black, blue, red, grey, and a limited-edition alien green.
Manufactured from 6082 aerospace grade aluminium.
Black anodised for ultimate protection and durability.
Increased capacity of over 60%
No engine check lights (EML)
Increased air flow
This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
Any items ordered then subsequently cancelled by the customer before delivery will incur 10% handling fee and will receive the remaining balance within 14 working days
Do we ship abroad ?
Yes we do, to almost anywhere in the world though remember the postage is often high when shipping anything bulky. Most bulky items we export will go by UPS so you can track the package online, Delivery times vary due to stock and import checks.
However there are a few countries we do not ship to, some of these include: Thailand, Malaysia, Indonesia, Russia, Nigeria, Macedonia, Syria, Ukraine, Lebanon.
Why is postage on bulky items to some countries expensive compared to some other companies ?
For both yours and our safety we use well known couriers such as DPD Local and UPS for shipping, then we know exactly where it is in the world at any time and we know its going to arrive safely. We can now ship using standard post on some items, however using all methods you may incur import charges when you receive the goods for which we cannot be responsible for.
How do I place an order if I live within the UK ?
You can either order here in our online shop or you can phone us or email us, using the following number/address are below.
Phone: +44 (0)1945 429000
How do I place an order if I live outside the UK ?
You can order online or by phoning or emailing us.
Phone: +44 (0)1945 429000
Yes we offer free fitting on most Milltek Catback systems, Just select the option at the checkout
No, Due to our Public Liability Insurance we do not fit any customer supplied parts.
Yes depending on how long the job will take and if you are happy to wait, We have a waiting area inside our reception
Yes, But please be aware most exhaust systems will not fit in the back of the car it is being fitted to! We will help cut the exhaust into sections to aid you taking the system back with you. We allow 7days for collection of your old exhaust, after this time we will dispose of the system.